Six Common Types of Heating and Furnace Repair in St. George, UT

January 27, 2017 2:58 am Published by Leave your thoughts

When your furnace breaks down, it can be a real drag. You are left without heat, and it always seems to happen when temperatures are unbearably cold. While you should call an HVAC company to come and inspect your furnace at the first sign of trouble, it is good to know the most common repairs that you’re likely to encounter, as you may be able to fix the problem on your own and avoid a service call. Here are the most common repairs an HVAC company sees on a heating system:

  • Clogged air filter: This is one you can certainly attend to yourself, as a clogged air filter just needs to be replaced with a new, clean filter. This is sometimes all you need to do to get your furnace up and running again. This is especially helpful if you sense that cold air is coming into your home, as a dirty filter can prevent warm air generated by the furnace from flowing into your home. It is recommended that you change your air filter every season to ensure it is clean and ready for operation during the winter.
  • Pilot control problems: As an integral part of your furnace, the pilot control or electronic ignition can malfunction, leaving you without heat. If you notice that your pilot light has gone out, consider having furnace repair in St. George, UT to get it operational again.
  • Mechanical wear: As your furnace ages, so do the components within its system. Parts start to lose their efficiency, and this can cause your heating system not to operate properly. These parts need to be replaced by professionals, thus requiring you to make a service call.
  • Thermostat issues: Oftentimes, what is going wrong with your heating system is related to the thermostat. It may not be holding temperature or performing its functions properly. An HVAC service will be able to diagnose what is going on with your thermostat and can even install a new one if needed.
  • Fan damage: If air is not flowing from your furnace into your home, the fan could be the cause of the problem. The fan may have stopped working, or may simply have been damaged. This can cause overheating and requires furnace repair in St. George, UT, to alleviate the problem.
  • Vent clogs: When air doesn’t seem to be reaching the rooms that you are trying to heat, it could be caused by a blocked vent. You will need to have your ductwork inspected for areas that have damage, such as a hole or other issue that is preventing the air from flowing properly. An HVAC service can inspect your ductwork and find the area that is causing the problem.

While these are some of the issues that can occur in your heating system, this list is not inclusive of all that could be wrong with your furnace. Furnace repair in St. George, UT is the only way to really determine what is wrong with your heating system and get it fixed. To have HVAC repair performed at your home or business, contact Calaway Heating & Air Conditioning. We provide air conditioning, furnace and commercial refrigeration repair, as well as duct cleaning. Call today to schedule an appointment!

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *